(800) 354-4297

Home > Products > Industrial Solenoid Valves > Series 2110 > Model 2110-6121 2, ElectroFlo Industrial Solenoid Valve To play, press and hold the enter key. To stop, release the enter key. Model 2110-6121 2, ElectroFlo Industrial Solenoid Valve 2 in. KEY SPECS Medium Water Operating Temperature 195º F Voltage 240V 60HZ 220V 50HZ Pressure Range 5.0 to 150.0 PSI DOWNLOADS Model 2110, Replacement Parts Hays, Valves Glossary Terms and Conditions Standard Features 2-way Normally Closed Pilot-Operated Piston-Type Bronze Construction UL Listed Variety of Voltages Maximum Temperature 195ºF Pressure Range 5 - 150 psi water Pressure Range 5 - 100 psi air Horizontal Installation Special Features Proven design. Many years of field experience have made these valves the standard in the industry. Wide range of operating pressures & temperatures. 5 psi to 150 psi pressure and temperatures to 195°F affords broad application and tremendous flexibility. Highest quality. Long life bronze castings and waterproof coils insure performance consistency for a long life. Rugged reliability saves money. Because of low incidence of down time and maintenance. Maximum flow. Minimum pressure drop internal design of this pilot operated piston-type valve assures exceptional flow performance. Two way-normally closed. Fail safe positive valve closing in the event of power failure prevents flooding or overfilling. APPLICATIONS NOTES Commercial Laundry Equipment and Facilities Commercial Dishwashers, Bottlewashers, Pot/Pan Washers Car & Truck Wash Facilities Irrigation Systems Humidification Water Treatment Poultry Incubators/Watering Equipment Industrial Maintenance, Repair, and Operation All Voltages available in all sizes.

Home > Products > Actuated Temperature Control Valves > Schneider Electric, On/Off Automatic Temperature Control Valve Schneider Electric, On/Off Automatic Temperature Control Valve 1/2 in. 3/4 in. 1 in. KEY SPECS Fail Safe Spring Return Valve Body Type Zone Valve Manufacturer Schneider Erie AG PopTop Series DOWNLOADS Terms and Conditions Spec Number COMP-SPEC-ATC2-001 COMP-SPEC-ATC2-002 COMP-SPEC-ATC2-003 Standard Features Direct replacement for all existing two-position PopTop applications Hysteresis synchronous motor for long life Spring Return operation provides a fail-safe Valve body rated for 400 psi static pressure Available in a variety of voltages Actuator mounts directly onto valve body without need for linkages or calibration Manual override lever (normally closed only) Actuator can be replaced without any tools or removal from the system SPECIFICATIONS MATERIALS APPLICATION ASSEMBLY SPECS ACUATOR SPECS Size 1/2 in. 3/4 in. 1 in. Type Actuated Temperature Control Valve, ATC Valve Body Type Zone Valve Manufacturer Schneider Erie AG PopTop Series Specification No. COMP-SPEC-ATC2-001 COMP-SPEC-ATC2-002 COMP-SPEC-ATC2-003 Valve Body Forged Brass Stem Nickel-plated Seat Brass Paddle VT Series-Buna N / VS Series-Highly saturated nitrite PopTop Series valve bodies and actuators provide easy installation for a variety of heating and cooling applications. Valve’s actuator can be installed after valve body has been installed onto fan coil, baseboard and air handler. VS series are available for low pressure steam applications. Service Hot and Chilled water models, up to 50% Glycol. Steam models up to 15 psi (both valve body and valve actuator must be rated for high pressure). System Static Pressure Limits: 400 psi (2068.4 kPa). Close-off Fluid/Ambient Temperature Limits Seat Leakage: ANSI class IV (0.01%) with pressure at inlet (B-port/A-port, If 3-Way) Voltage: 24v (50/60Hz) or 110 Vac @ 50 Hz. and 120 Vac @ 60 Hz. Power Requirements: 6.5 watts, 7.5 Va End Switch: 24-240 VAC Models: 101 mA min. to 5A max, and 9 - 30 Vdc @ 100 mA max Control Signal: On/Off, 2 position, spring return Timing, Full Open to Full Close: 25 Sec max for 60 Hz; 30 Sec max for 50 Hz; and 9 Sec max spring return Materials: Stainless steel base plate, aluminum cover Ambient Temperature Limits: Shipping & Storage, -40 to 160ºF (-40 to 70ºC); Operating Temperature Humidity: 5 to 95% relative humidity, non-condensing Agency Listings (Actuator Only): UL873 Underwriters Laboratories (File #E9429 Category Temperature Indicating and Regulating Equipment) CUL: UL Listed for use in Canada by Underwriters Laboratory. Canadian Standards C22.2 No.24. European Community: EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC). Australia: This product meets the requirements to bear the C-Tick Mark according to the terms specified by the Communications Authority under the Radio Communications Act of 1992. Shipping Weight: Actuator and Valve Assembly 2.25 lbs (1020 g).

Home > Products > Marine Applications - Military > Model 3544, Y-Ball Low Differential Pressure Valve Model 3544, Y-Ball Low Differential Pressure Valve 2 in. KEY SPECS Flow Rates 30.00 to 100.00 GPM Differential Operating Pressure 5-150 PSID DOWNLOADS Terms and Conditions Standard Features Sizes: 2” Differential Operating Pressure: 30.00-60.00 GPM: 5-150 PSID 65.00-70.00 GPM: 10-150 PSID 80.00-100.00 GPM: 10-150 PSID Flow Rates: 30.00, 35.00, 40.00, 45.00, 50.00, 55.00, 60.00, 65.00, 70.00, 75.00, 80.00, 85.00, 90.00, 95.00, 100.00 GPM Flow Accuracy: +/- 5% over 95% of operating pressure differential range Maximum Operating Temperature: 225° Valves are marked with flow direction arrows, size and flow rate. Hydrostatic Tested @ 660 psi Fresh/Salt Water Configurations Service Kits Available Tested to Military Standards Body is available in C83600 Connections are available with Silver Braze (C83600), Socket Weld End (C70600, C71500, & S30403) or Solder (C36000) Fittings Approximate weight: 33.3 lbs SPECIFICATIONS Valve Style Y-Ball Model No. 3544 Size 2 in. Flow Rate 30.00 to 100.00 GPM Inlet Connections Silver Braze Socket Weld End Outlet Connections Silver Braze Socket Weld End Differential Operating Pressure 5-150 PSID Maximum Operating Temperature 225° F Accuracy +/- 5% over 95% of operating pressure differential range Hydrostatic Testing Limit 660 PSI

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1081 1/2, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1081 1/2, Mesurflo® Automatic Flow Control 1/2 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Industrial Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/2 in. Flow Rate 2 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-7/32 in. Diameter Across Corners 1-1/4 in.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1091 1/2, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1091 1/2, Mesurflo® Automatic Flow Control 1/2 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Industrial Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/2 in. Flow Rate 2-1/2 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-7/32 in. Diameter Across Corners 1-1/4 in.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1051 3/8, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1051 3/8, Mesurflo® Automatic Flow Control 3/8 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Industrial Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 3/8 in. Flow Rate 1-1/4 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 1-3/4 in. Diameter Across Corners 1-1/16 in.

Home > Products > Piping Packages > Series 2519, Automatic 3 Way Hard Piping Package Series 2519, Automatic 3 Way Hard Piping Package 1/2 in. 3/4 in. KEY SPECS Flow Rate 0.50 to 5.0 GPM Material 3 Way DOWNLOADS Model 2519, Piping Package Spec, 3-Way, Hard Model 2519, Piping Package Spec, 3-Way, Hard Piping Package Installation & Operation Manual Spec Number ABPP-SPEC-3P19-002 Standard Features Model 2519 Y-Ball Mesurflo with Pressure/Temperature Ports FSWT Coil Fittings with Pressure/Temperature Ports Y-Ball Strainer with Pressure/Temperature Port (in#4 port) and Blowdown Valve with Hose Connector Lever Handle Package Shrink Wrapped on Skin Board (Hard Pipe & Flexible Packages up to 3/4" and Flex Packages using hose lengths up to 24" will be shrink wrapped on skin board. Other sizes are too large and heavy for the board.) Mixing ATC Assembled on Return Side of Piping Packages as Shown in the Normally Closed Position. For Normally Closed Selection, Port (A) would be Assembled to the By-Pass and Port (B) to the Coil. Port (B) is Always Closed When Not Energized. Options Hays Supplied & Installed ATC: 1/2" - 3/4" - 2-Wire 120v, Normally Open or Normally Closed Hays Supplied & Installed ATC: 1/2" - 3/4" - 2-Wire 24v, Normally Open or Normally Closed Customer Supplied - Hays Installed ATC Customer Supplied-Field Installed ATC Extended Pressure/Temperature Ports & Extended Handles Manual Air Vent on Return Side Coil Connection Short Handle Shown SPECIFICATIONS Size 1/2 in. 3/4 in. Model No. 2519 Type Automatic Flow Rate 0.50 to 5.0 GPM Style 3 Way Specification No. ABPP-SPEC-3P19-002

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1151 3/4, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1151 3/4, Mesurflo® Automatic Flow Control 3/4 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Industrial Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 3/4 in. Flow Rate 6 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-9/16 in. Diameter Across Corners 1-17/32 in.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1051 3/4, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1051 3/4, Mesurflo® Automatic Flow Control 3/4 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Industrial Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 3/4 in. Flow Rate 1-1/4 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-9/16 in. Diameter Across Corners 1-17/32 in.

Home > Products > Manual Balancing Valves > Model No. CBYF1200, Combination Butterfly/Venturi Valve with Flange, 12 in. To play, press and hold the enter key. To stop, release the enter key. Model No. CBYF1200, Combination Butterfly/Venturi Valve with Flange, 12 in. 12 in. KEY SPECS Lower Flow Range 1250 GPM Flow Factor 9670 Upper Flow Range 6700 GPM CORE MATERIALS Flange Forged Carbon Steel ASTM A105 Venturi Steel Casting, Carbon ASTM A216 Grade WCB Butterfly Valve Nodular Cast Iron ASTM A536 60-4-18 DOWNLOADS Model CBVF, Spec Sheet Model CBVF, How to Order Model CBVF, Installation & Operation Model CBVF, Differential Pressure Table Terms and Conditions Spec Number MBV-SPEC-MV10-005 Standard Features Model CBVF is a combination butterfly valve and flanged style venturi. The carbon steel venturi connects to standard ANSI Class 150 pound flanges, and is combined with a lug type butterfly valve for throttling. The cast iron butterfly valve has a combination infinite/10 position memory stop plate, a one piece disc/shaft, a triple shaft bearing, an aluminum-bronze disc for sizes 2-1/2" - 8", a nickel plated disc for the 10" and 12" sizes, and an EPDM standard liner. It also comes with two pressure/temperature ports. Please Note: Denotes a gear operated valve. All dimensions and materials are subject to minor variations. Options CBYF1200 Combination Butterfly Venturi valve has no additional options available. SPECIFICATIONS MATERIALS Size 12 in. Model No. CBYF1200 Style CBVF, Combination Butterfly/Venturi Flow Factor 9670 Lower Flow Range 1250 GPM Higher Flow Range 6700 GPM 422 lbs. Weight MBV-SPEC-MV10-005 Specification No. Flange Forged Carbon Steel ASTM A105 Venturi Steel Casting, Carbon ASTM A216 Grade WCB Butterfly Valve Nodular Cast Iron ASTM A536 60-4-18 Seat Material EPDM Disc (2-1/2"-8") Aluminum-Bronze Sand Casting, ASTM B148 C95800 Disc (10" & 12") Nickel Plated Aluminum-Bronze Sand, Casting ASTM B148 C95800 Shaft Stainless Steel AISI 410 O-Rings EPDM Rubber Bearing Copper ASTM B45 Bearing Bush PTFE Hand Lever Nodular Cast Iron ASTM A536 60-4-18

Home > Products > Components > Stainless Steel Braided Flexible Hose - 0.5 to 1.25 inch Stainless Steel Braided Flexible Hose - 0.5 to 1.25 inch 1/2 in. 3/4 in. 1 in. 1-1/4 in. KEY SPECS Maximum Working Pressure 400 psi Minimum Burst Pressure 1600 psi Temperature Rating 32 to 225 ºF DOWNLOADS Stainless Steel Braided Flex Hose Spec, 1/2in.-2 in. Stainless Steel Braided Flex Hose Spec, 1-1/2in.-3 in. Hose, Installation and Operation Specification No. COMP-SPEC-HOSE1-006 Standard Features Hays braided hose is designed to be used on Commercial HVAC Systems where system pressures require heavy duty hose that withstands years of fluctuating and extreme pressure situations. The braiding also limits the hose from crimping, which reduces flow and impairs the function of the coil. SPECIFICATIONS MATERIALS NOTES Type Stainless Steel Braided Flexible Hose Model No. HOSE1 Size 1/2 in. 3/4 in. 1 in. 1-1/4 in. Hose Lengths (1) 12 in. 18 in. 24 in. 36 in. Approximate Outside Diameter 0.7 in (for Size - 1/2 in) 0.97 in (for Size - 3/4 in) 1.3 in (for Size - 1 in) 1.64 in (for Size - 1-1/4 in) Maximum Working Pressure 400 psi Minimum Burst Pressure 1600 psi Temperature Rating 32 to 225 ºF Bend Radius 2.0 in (for Size - 1/2 in) 3.5 in (for Size - 3/4 in) 4.5 in (for Size - 1 in) 6 in (for Size - 1-1/4 in) Hose Connections Permanently Crimped Swivels Use Self Actuating Fiber Gaskets Threads National Pipe Threads per ANSI B1.20.3 Type 1 Class 1 Connectors Brass UNSC36000 Specification No. COMP-SPEC-HOSE1-006 Liner Reinforced EPDM Cover Stainless Steel Braid Ferrules 300 Stainless Steel Connections Brass UNSC36000 (1) Dimension equals overall length of the hose from the Male Fixed end to the end of the Swivel attachment. Hose pictured above includes the BP swivel and gasket and BP x MNPT adapter

Home > Products > Automatic Balancing Valves > Model 2547 Mesurflo® Inline Automatic Balancing Valve To play, press and hold the enter key. To stop, release the enter key. Model 2547 Mesurflo® Inline Automatic Balancing Valve 6 in. 8 in. 10 in. KEY SPECS Flow Rate 250 to 2500 GPM Differential Operating Pressure 5-80 PSID (40.0 to 200.0 GPM) DOWNLOADS Model 2547, Spec Sheet Model 2547, How to Order Model 2546-47-48, Installation/Operation Manual Performance Spec Summary Terms and Conditions Spec Number ABV-SPEC-2547-003 Standard Features Flanged Inlet/Outlet Connections Differential Operating Pressure 5-80 PSID ± 10% Accuracy Operating Temperature Range 32ºF to 225ºF Valves Labeled with Model No., Size & Flow Rate Options Pressure/Temperature Ports Extended Pressure/Temperature Ports Stainless Steel Tag-Chain SPECIFICATIONS MATERIALS Size 6 in. 8 in. 10 in. Style Inline Type Automatic Balancing Valve Model No. 2547 Flow Rate 250 to 2500 GPM Flange Rating 150 lbs. Inlet Connections Flanged Outlet Connections Flanged Differential Operating Pressure 5-80 PSID (40.0 to 200.0 GPM) Accuracy ± 10 % Operating Temperature Range 32 ºF to 225 ºF Specification No. ABV-SPEC-2547-003 Weight See Spec Sheet Dimensions See Spec Sheet Valve Body Carbon Steel Diaphragm EPDM Orifice Polyphenylsulfone O-Rings N/A Pressure/Temperature Ports N/A Ball N/A Groove N/A Weld N/A Flange 150 lbs. Union End N/A Union Nut N/A Coupling Nut N/A Tail Piece N/A End Plate N/A Adapter Plate Carbon Steel Ball Seat N/A Stem Material N/A End Cap N/A Ball Valve End N/A Short Handle N/A Retainer Ring N/A Retainer Cage Stainless Steel Orifice Holder Brass Clip Stainless Steel Bolt & Nut N/A Plug N/A Laser Cut Center Plate N/A Cartridge Holder N/A